It's only a layer of the simplest circuit board, but some of the circuit board up to 36. Correct assembly circuit board is not an easy thing. Most of the time, common mistakes can lead to a printed circuit board assembly fault, such as short circuit, it may damage the precision components.

This is usually due to poor planning and a lack of knowledge and experience of the assembly process.

Our technical staff using meticulous process and adhere to the highest standard, managed to avoid a very common mistake in PCB assembly, such as:

1, the power shortage

At every stage of the circuit board assembly, a thorough examination electric circuit board is very important. Otherwise, there might be a power shortage, so as to affect the function of the circuit board. This is the cold test and check on a regular basis to ensure that our circuit boards up to standard.

2. Improper components assembly

When the component is placed on the plate is not at that time, there will be a mechanical problem. Well-trained technical personnel needs the touch of light, precise, they'll know place the appropriate distance component, in order to avoid them too close to each other, this will make it difficult to welding. This requires an understanding of the mechanical size components and precise calculation.

3. The problem of customs clearance

This is common problem encountered in the process of printed circuit board assembly, including design does not comply with the clearance limit. We have in-depth knowledge of assembly process and component, thus to avoid the problem.

4. The problem of the bit

For the assembly process to choose the appropriate bit and understand its ability is very important. select bit error can lead to cost increase and assembly failure, but the master of professional bit specifications of experts will know what kind of equipment is best for this situation.

In order to avoid in the process of PCB assembly may all these errors, advisory trusted experts will help.